AFL Motors

EC axial fanA3P350-EC092-044

A3P350-EC092-044 is an AFL ec axial fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Series photo · AFL catalogue, page 22.
Series photo · AFL catalogue, page 22.

Review the documented model data

Supply: 230 VAC. Frequency: 50/60 Hz. Power input: 165 W. Speed: 1550 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 230 VAC, 50/60 Hz, 165 W for this ec axial fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.

Check the installation and operating point

Check air direction, guard and inlet clearance, mounting positions and the coil or grille layout. Evaluate the curve using the resistance of the complete installed air path.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include A3P350-EC092-044, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC axial fans

All A3P350-EC092 variants

Specifications

Model
A3P350-EC092-044
Drive
EC
Air direction
suction
Supply
230 VAC
Frequency
50/60 Hz
Power input
165 W
Control input
0-10 VDC / PWM
Current draw
1.1 A
Working temperature
-25 ~ +60 ᵒC
Degree of protection
IP44
Speed
1550 rpm
Sound pressure level
67 dB
Insulation class
B
Impeller material
PA66

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 22
View original drawing or performance sheet · page 22A3P350-EC092-044 manufacturer sheet, page 22

Open original PDF at this page

AFL product catalogue · page 22
Catalogue fieldValue on this page
Supply230 VAC
Frequency50/60 Hz
Current draw1.1 A
Power input165 W
Speed1550 rpm
Control input0-10 VDC / PWM
Sound pressure level67 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialPA66

Sources

Related documents and engineering decisions

EC axial fan catalogue · p. 11
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For a coil, condenser or cabinet air path, check suction versus blowing, guard clearance and the working point with the actual system resistance.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

Series photo · AFL catalogue, page 24.Series photo · AFL catalogue, page 24.A3P350-EC092-009A3P350-EC092-009: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.A3P350-EC092 series photo · AFL catalogue, page 22. See the drawing below for this suffix.A3P350-EC092 series photo · AFL catalogue, page 22. See the drawing below for this suffix.A3P350-EC092-040A3P350-EC092-040: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.A3P350-EC092 series photo · AFL catalogue, page 22. See the drawing below for this suffix.A3P350-EC092 series photo · AFL catalogue, page 22. See the drawing below for this suffix.A3P350-EC092-041A3P350-EC092-041: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Related resources and guides

EC axial fan catalogue · source previewEC axial fan catalogue · source previewTechnical resourcesEC axial fan catalogueCheck axial fan diameter, control interface, airflow curve and mounting drawing.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.