AFL Motors

EC backward-curved centrifugal fanB3P220-EC092-100

B3P220-EC092-100 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P220-EC092-100 product photo · AFL catalogue, page 89.
B3P220-EC092-100 product photo · AFL catalogue, page 89.

Review the documented model data

Supply: 230 VAC. Frequency: 50/60 Hz. Power input: 145 W. Speed: 3310 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 230 VAC, 50/60 Hz, 145 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44. The earlier catalogue lists 220 VAC; confirm the supply on the offered revision. The stored records contain differing values: Supply 230 VAC versus Nominal supply 220 VAC. Confirm which document revision and operating conditions apply to the offered model before specification.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P220-EC092-100, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

Specifications

Model
B3P220-EC092-100
Nominal supply
220 VAC
Frequency
50/60 Hz
Listed speed
3310 rpm
Input power
145 W
Supply
230 VAC
Current draw
1.0 A
Power input
145 W
Speed
3310 rpm
Control input
0-10 VDC / PWM
Sound pressure level
74 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
PA66

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 89
View original drawing or performance sheet · page 89B3P220-EC092-100 manufacturer sheet, page 89

Open original PDF at this page

Before specifying this model

Confirm the complete suffix, current revision, duty-point curve, applicable certification and availability with AFL. This record describes the model in the cited manufacturer catalogue.

AFL product catalogue · page 89
Catalogue fieldValue on this page
Supply230 VAC
Frequency50/60 Hz
Current draw1.0 A
Power input145 W
Speed3310 rpm
Control input0-10 VDC / PWM
Sound pressure level74 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialPA66

Sources

Related documents and engineering decisions

EC backward-curved centrifugal fan catalogue · p. 16

Files and media

Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

B3P133-EC072-010 product photo · AFL catalogue, page 76.B3P133-EC072-010 product photo · AFL catalogue, page 76.B3P133-EC072-010B3P133-EC072-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P220-EC072-010 product photo · AFL catalogue, page 88.B3P220-EC072-010 product photo · AFL catalogue, page 88.B3P220-EC072-010B3P220-EC072-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P220-EC072-100 product photo · AFL catalogue, page 87.B3P220-EC072-100 product photo · AFL catalogue, page 87.B3P220-EC072-100B3P220-EC072-100: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Related resources and guides

B3P220-EC072-100 product photo · AFL catalogue, page 87.B3P220-EC072-100 product photo · AFL catalogue, page 87.Compare modelsCompare EC centrifugal fan catalogue entriesUse these catalogue rows to shortlist by exact code, then compare pressure and airflow at the same duty point.Product example: B3P220-EC092-100.Product example: B3P220-EC092-100.OEM programmesReview an evaluation sampleTie the sample label to the quotation and the drawing.EC backward-curved centrifugal fan catalogue · source previewEC backward-curved centrifugal fan catalogue · source previewTechnical resourcesEC backward-curved centrifugal fan catalogueUse the full EC fan designation to locate the curve, control wiring and installation drawing.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.