AFL Motors

EC backward-curved centrifugal fanB3P450-EC188-910

B3P450-EC188-910 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P450-EC188-910 product photo · AFL catalogue, page 163.
B3P450-EC188-910 product photo · AFL catalogue, page 163.

Review the documented model data

Supply: 3x400 VAC. Frequency: 50/60 Hz. Power input: 4600 W. Speed: 2800 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 3x400 VAC, 50/60 Hz, 4600 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP54.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P450-EC188-910, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

All B3P450-EC188 variants

Specifications

Model
B3P450-EC188-910
Drive
EC
Supply
3x400 VAC
Frequency
50/60 Hz
Current draw
8.0 A
Power input
4600 W
Speed
2800 rpm
Control input
0-10 VDC / PWM
Sound pressure level
96 dB
Degree of protection
IP54
Working temperature
-30 ~ +40 °C
Insulation class
F
Impeller material
sheet aluminium

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 163
View original drawing or performance sheet · page 163B3P450-EC188-910 manufacturer sheet, page 163

Open original PDF at this page

AFL product catalogue · page 163
Catalogue fieldValue on this page
Supply3x400 VAC
Frequency50/60 Hz
Current draw8.0 A
Power input4600 W
Speed2800 rpm
Control input0-10 VDC / PWM
Sound pressure level96 dB
Degree of protectionIP54
Working temperature-30 ~ +40 °C
Insulation classF
Impeller materialsheet aluminium
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

B3P450-EC188-020 product photo · AFL catalogue, page 160.B3P450-EC188-020 product photo · AFL catalogue, page 160.B3P450-EC188-020B3P450-EC188-020: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P450-EC188-021 product photo · AFL catalogue, page 161.B3P450-EC188-021 product photo · AFL catalogue, page 161.B3P450-EC188-021B3P450-EC188-021: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P450-EC188-920 product photo · AFL catalogue, page 162.B3P450-EC188-920 product photo · AFL catalogue, page 162.B3P450-EC188-920B3P450-EC188-920: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.