AFL Motors

EC axial fan A3P250-EC092-045

A3P250-EC092-045 is an AFL ec axial fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Series photo · AFL catalogue, page 10.
Series photo · AFL catalogue, page 10.

Review the documented model data

Supply: 230 VAC. Frequency: 50/60 Hz. Power input: 200 W. Speed: 3150 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 230 VAC, 50/60 Hz, 200 W for this ec axial fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.

Check the installation and operating point

Check air direction, guard and inlet clearance, mounting positions and the coil or grille layout. Evaluate the curve using the resistance of the complete installed air path.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include A3P250-EC092-045, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC axial fans

All A3P250-EC092 variants

Specifications

Model
A3P250-EC092-045
Drive
EC
Air direction
blowing
Supply
230 VAC
Frequency
50/60 Hz
Current draw
1.4 A
Power input
200 W
Speed
3150 rpm
Control input
0-10 VDC / PWM
Sound pressure level
69 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
PA66

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 10
View original drawing or performance sheet · page 10A3P250-EC092-045 manufacturer sheet, page 10

Open original PDF at this page

AFL product catalogue · page 10
Catalogue fieldValue on this page
Supply230 VAC
Frequency50/60 Hz
Current draw1.4 A
Power input200 W
Speed3150 rpm
Control input0-10 VDC / PWM
Sound pressure level69 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialPA66

Sources

Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For a coil, condenser or cabinet air path, check suction versus blowing, guard clearance and the working point with the actual system resistance.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

A3P250-EC092 series photo · AFL catalogue, page 8. See the drawing below for this suffix.A3P250-EC092 series photo · AFL catalogue, page 8. See the drawing below for this suffix.A3P250-EC092-001A3P250-EC092-001: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.A3P250-EC092 series photo · AFL catalogue, page 8. See the drawing below for this suffix.A3P250-EC092 series photo · AFL catalogue, page 8. See the drawing below for this suffix.A3P250-EC092-002A3P250-EC092-002: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.A3P250-EC092 series photo · AFL catalogue, page 8. See the drawing below for this suffix.A3P250-EC092 series photo · AFL catalogue, page 8. See the drawing below for this suffix.A3P250-EC092-003A3P250-EC092-003: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.