EC axial fan A3P400-EC102-004
A3P400-EC102-004 is an AFL ec axial fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Review the documented model data
Supply: 230 VAC. Frequency: 50/60 Hz. Power input: 400 W. Speed: 1700 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 230 VAC, 50/60 Hz, 400 W for this ec axial fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.
Check the installation and operating point
Check air direction, guard and inlet clearance, mounting positions and the coil or grille layout. Evaluate the curve using the resistance of the complete installed air path.
Match the electrical interface
Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.
Use the technical documents
Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.
Discuss this model
Include A3P400-EC102-004, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.
EC fans and blowers · EC axial fans
Specifications
- Model
- A3P400-EC102-004
- Drive
- EC
- Air direction
- suction
- Supply
- 230 VAC
- Frequency
- 50/60 Hz
- Power input
- 400 W
- Control input
- 0-10 VDC / PWM
- Current draw
- 1.9 A
- Working temperature
- -25 ~ +60 ᵒC
- Degree of protection
- IP44
- Speed
- 1700 rpm
- Sound pressure level
- 69 dB
- Insulation class
- B
- Impeller material
- sheet steel
Manufacturer catalogue pages
Check the drawing and rated conditions for the complete model.
Catalogue page 25| Catalogue field | Value on this page |
|---|---|
| Supply | 230 VAC |
| Frequency | 50/60 Hz |
| Current draw | 1.9 A |
| Power input | 400 W |
| Speed | 1700 rpm |
| Control input | 0-10 VDC / PWM |
| Sound pressure level | 69 dB |
| Degree of protection | IP44 |
| Working temperature | -25 ~ +60 °C |
| Insulation class | B |
| Impeller material | sheet steel |
Sources
Related documents and engineering decisions
EC axial fan catalogue · p. 12Equipment fit and selection
For a coil, condenser or cabinet air path, check suction versus blowing, guard clearance and the working point with the actual system resistance.
Equipment selection guide What to check before ordering Factory and qualification documentsRelated models to review
Compare the complete suffix, mounting and operating conditions before specifying a replacement.
A3P400-EC102 series photo · AFL catalogue, page 25. See the drawing below for this suffix.A3P400-EC102-001A3P400-EC102-001: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
A3P400-EC102 series photo · AFL catalogue, page 25. See the drawing below for this suffix.A3P400-EC102-002A3P400-EC102-002: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
A3P400-EC102 series photo · AFL catalogue, page 25. See the drawing below for this suffix.A3P400-EC102-003A3P400-EC102-003: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
EC axial fan catalogue · source previewTechnical resourcesEC axial fan catalogue