EC axial fan A3P710-EC188-022
A3P710-EC188-022 is an AFL ec axial fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Review the documented model data
Supply: 3x400 VAC. Frequency: 50/60 Hz. Power input: 1280 W. Speed: 1300 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 3x400 VAC, 50/60 Hz, 1280 W for this ec axial fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.
Check the installation and operating point
Check air direction, guard and inlet clearance, mounting positions and the coil or grille layout. Evaluate the curve using the resistance of the complete installed air path.
Match the electrical interface
Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.
Use the technical documents
Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.
Discuss this model
Include A3P710-EC188-022, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.
EC fans and blowers · EC axial fans
Specifications
- Model
- A3P710-EC188-022
- Drive
- EC
- Air direction
- suction
- Supply
- 3x400 VAC
- Frequency
- 50/60 Hz
- Power input
- 1280 W
- Control input
- 0-10 VDC / PWM
- Current draw
- 2.2 A
- Working temperature
- -25 ~ +60 ᵒC
- Degree of protection
- IP44
- Speed
- 1300 rpm
- Sound pressure level
- 77 dB
- Insulation class
- F
- Impeller material
- sheet steel
- Mounting arrangement
- With wind guide panel
Manufacturer catalogue pages
Check the drawing and rated conditions for the complete model.
Catalogue page 68Installation check
The drawing on page 68 identifies suction airflow and the following arrangement: With wind guide panel. Check its depth and fixing pattern against the proposed enclosure. Use the full drawing when ordering.
| Catalogue field | Value on this page |
|---|---|
| Supply | 3x400 VAC |
| Frequency | 50/60 Hz |
| Current draw | 2.2 A |
| Power input | 1280 W |
| Speed | 1300 rpm |
| Control input | 0-10 VDC / PWM |
| Sound pressure level | 77 dB |
| Degree of protection | IP44 |
| Working temperature | -25 ~ +60 °C |
| Insulation class | F |
| Impeller material | sheet steel |
Sources
Equipment fit and selection
For a coil, condenser or cabinet air path, check suction versus blowing, guard clearance and the working point with the actual system resistance.
Equipment selection guide What to check before ordering Factory and qualification documentsRelated models to review
Compare the complete suffix, mounting and operating conditions before specifying a replacement.
A3P200-EC072 series photo · AFL catalogue, page 4. See the drawing below for this suffix.A3P200-EC072-001A3P200-EC072-001: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
A3P200-EC072 series photo · AFL catalogue, page 4. See the drawing below for this suffix.A3P200-EC072-002A3P200-EC072-002: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
Series photo · AFL catalogue, page 68.A3P710-EC188-023A3P710-EC188-023: review ec axial fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.