AFL Motors

EC backward-curved centrifugal fan B3P175-EC072-100

B3P175-EC072-100 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P175-EC072-100 product photo · AFL catalogue, page 78.
B3P175-EC072-100 product photo · AFL catalogue, page 78.

Review the documented model data

Supply: 220 VAC. Frequency: 50/60 Hz. Power input: 80 W. Speed: 3650 rpm. Control input: 0-10 VDC / PWM. Published diameter: 175 mm. The AFL catalogue lists 230 VAC, 50/60 Hz, 80 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP54. The stored records contain differing values: Supply 220 VAC in the stored specification versus 230 VAC in the source table. Confirm which document revision and operating conditions apply to the offered model before specification.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P175-EC072-100, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

Specifications

Model
B3P175-EC072-100
Supply
220 VAC
Frequency
50/60 Hz
Listed speed
3650 rpm
Input power
80 W
Current draw
0.65 A
Listed sound pressure level
74 dB
Drive
EC
Published diameter
175 mm
Ambient temperature
−25 to +60 °C
Power input
80 W
Speed
3650 rpm
Control input
0-10 VDC / PWM
Sound pressure level
74 dB
Degree of protection
IP54
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
PA66

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 78
View original drawing or performance sheet · page 78B3P175-EC072-100 manufacturer sheet, page 78

Open original PDF at this page

Selection from the source sheet

175 mm EC backward-curved centrifugal fan. The sheet lists 3650 rpm and 80 W. Check the control curve at the required airflow and pressure, the installation drawing and the full suffix.

AFL product catalogue · page 78
Catalogue fieldValue on this page
Supply230 VAC
Frequency50/60 Hz
Current draw0.65 A
Power input80 W
Speed3650 rpm
Control input0-10 VDC / PWM
Sound pressure level74 dB
Degree of protectionIP54
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialPA66

Related documents and engineering decisions

Compact EC centrifugal fan sheets: 175 and 190 mm · p. 1 EC backward-curved centrifugal fan catalogue · p. 10
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

B3P133-EC072-010 product photo · AFL catalogue, page 76.B3P133-EC072-010 product photo · AFL catalogue, page 76.B3P133-EC072-010B3P133-EC072-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P133-EC072-028 product photo · AFL catalogue, page 73.B3P133-EC072-028 product photo · AFL catalogue, page 73.B3P133-EC072-028B3P133-EC072-028: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P133-EC072-030 product photo · AFL catalogue, page 72.B3P133-EC072-030 product photo · AFL catalogue, page 72.B3P133-EC072-030B3P133-EC072-030: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Related resources and guides

EC backward-curved centrifugal fan catalogue · source previewEC backward-curved centrifugal fan catalogue · source previewTechnical resourcesEC backward-curved centrifugal fan catalogueUse the full EC fan designation to locate the curve, control wiring and installation drawing.Compact EC centrifugal fan sheets: 175 and 190 mm · source previewCompact EC centrifugal fan sheets: 175 and 190 mm · source previewTechnical resourcesCompact EC centrifugal fan sheets: 175 and 190 mmCompare the listed compact impellers, frames, wiring and control curves by complete suffix.B3P190-EC072-907 · manufacturer model sheet.B3P190-EC072-907 · manufacturer model sheet.Compare modelsCompare compact EC suffixes against their source sheetsCheck speed, electrical load and sound level for individual catalogue variants before opening the curve and mounting drawing.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.