EC backward-curved centrifugal fan B3P220-EC072-100
B3P220-EC072-100 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Review the documented model data
Supply: 230 VAC. Frequency: 50/60 Hz. Power input: 75 W. Speed: 2600 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 230 VAC, 50/60 Hz, 75 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44. The earlier catalogue lists 220 VAC; confirm the supply on the offered revision. The stored records contain differing values: Supply 230 VAC versus Nominal supply 220 VAC. Power input 75 W versus Input power 70 W. Speed 2600 rpm versus Listed speed 2500 rpm. Confirm which document revision and operating conditions apply to the offered model before specification.
Check the installation and operating point
Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.
Match the electrical interface
Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.
Use the technical documents
Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.
Discuss this model
Include B3P220-EC072-100, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.
EC fans and blowers · EC backward-curved fans
Specifications
- Model
- B3P220-EC072-100
- Nominal supply
- 220 VAC
- Frequency
- 50/60 Hz
- Listed speed
- 2500 rpm
- Input power
- 70 W
- Supply
- 230 VAC
- Current draw
- 0.6 A
- Power input
- 75 W
- Speed
- 2600 rpm
- Control input
- 0-10 VDC / PWM
- Sound pressure level
- 71 dB
- Degree of protection
- IP44
- Working temperature
- -25 ~ +60 °C
- Insulation class
- B
- Impeller material
- PA66
Manufacturer catalogue pages
Check the drawing and rated conditions for the complete model.
Catalogue page 87Before specifying this model
Confirm the complete suffix, current revision, duty-point curve, applicable certification and availability with AFL. This record describes the model in the cited manufacturer catalogue.
| Catalogue field | Value on this page |
|---|---|
| Supply | 230 VAC |
| Frequency | 50/60 Hz |
| Current draw | 0.6 A |
| Power input | 75 W |
| Speed | 2600 rpm |
| Control input | 0-10 VDC / PWM |
| Sound pressure level | 71 dB |
| Degree of protection | IP44 |
| Working temperature | -25 ~ +60 °C |
| Insulation class | B |
| Impeller material | PA66 |
Sources
Files and media
Equipment fit and selection
For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.
Equipment selection guide What to check before ordering Factory and qualification documentsRelated models to review
Compare the complete suffix, mounting and operating conditions before specifying a replacement.
B3P133-EC072-010 product photo · AFL catalogue, page 76.B3P133-EC072-010B3P133-EC072-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
B3P220-EC072-010 product photo · AFL catalogue, page 88.B3P220-EC072-010B3P220-EC072-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
B3P220-EC092-100 product photo · AFL catalogue, page 89.B3P220-EC092-100B3P220-EC092-100: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.Related resources and guides
B3P220-EC072-100 product photo · AFL catalogue, page 87.Compare modelsCompare EC centrifugal fan catalogue entriesUse these catalogue rows to shortlist by exact code, then compare pressure and airflow at the same duty point.
Product example: B3P220-EC072-100.OEM programmesFreeze the OEM specificationAgree which drawings and measurements define the sample.
AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.Technical resourcesElectrical data requestCollect nameplate and supply information before approval.
B3P220-EC072-100 product photo · AFL catalogue, page 87.FAQFan purchasing questionsAnswers to common requests for drawings, model references and current pricing.
AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.Selection guideWhat should an AHU buyer send for fan selection?Pair the required airflow with static pressure and the installation envelope so suppliers can compare options at the same duty point.
AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.Selection guideWhy does the last suffix matter on a B3P225 quotation?Two entries in the catalogue share a nominal diameter but list different nominal speed and input power. Carry the complete code into the quotation and purchase order.
B3P280-EC092-004 product photo · AFL catalogue, page 103.Selection guideHow do I compare two curves at the same duty point?Record airflow and static pressure together. A maximum free-air flow is measured at a different point from operation against an installed filter or coil.
B3P220-EC072-100 product photo · AFL catalogue, page 87.Selection guideWhich details belong in an EC control-interface request?A reference to variable speed leaves the electrical interface and feedback requirements open. Describe the controller output and the response expected by the equipment.