AFL Motors

EC backward-curved centrifugal fan B3P250-EC092-033

B3P250-EC092-033 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P250-EC092-033 product photo · AFL catalogue, page 100.
B3P250-EC092-033 product photo · AFL catalogue, page 100.

Review the documented model data

Supply: 220 VAC. Frequency: 50/60 Hz. Power input: 145 W. Speed: 2500 rpm. Control input: 0-10 VDC / PWM. Published diameter: 250 mm. The AFL catalogue lists 230 VAC, 50/60 Hz, 145 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44. The stored records contain differing values: Supply 220 VAC in the stored specification versus 230 VAC in the source table. Confirm which document revision and operating conditions apply to the offered model before specification.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P250-EC092-033, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

All B3P250-EC092 variants

Specifications

Model
B3P250-EC092-033
Supply
220 VAC
Frequency
50/60 Hz
Listed speed
2500 rpm
Input power
145 W
Current draw
1.0 A
Listed sound pressure level
74 dB
Drive
EC
Published diameter
250 mm
Ambient temperature
−25 to +60 °C
Power input
145 W
Speed
2500 rpm
Control input
0-10 VDC / PWM
Sound pressure level
74 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
sheet aluminium

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 100
View original drawing or performance sheet · page 100B3P250-EC092-033 manufacturer sheet, page 100

Open original PDF at this page

Selection from the source sheet

250 mm EC backward-curved centrifugal fan. The sheet lists 2500 rpm and 145 W. Check the control curve at the required airflow and pressure, the installation drawing and the full suffix.

AFL product catalogue · page 100
Catalogue fieldValue on this page
Supply230 VAC
Frequency50/60 Hz
Current draw1.0 A
Power input145 W
Speed2500 rpm
Control input0-10 VDC / PWM
Sound pressure level74 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialsheet aluminium

Related documents and engineering decisions

EC centrifugal fan sheets: 225 and 250 mm · p. 3 EC backward-curved centrifugal fan catalogue · p. 21
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.B3P250-EC092-002B3P250-EC092-002: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.B3P250-EC092-003B3P250-EC092-003: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P250-EC092-020 product photo · AFL catalogue, page 98.B3P250-EC092-020 product photo · AFL catalogue, page 98.B3P250-EC092-020B3P250-EC092-020: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Related resources and guides

EC backward-curved centrifugal fan catalogue · source previewEC backward-curved centrifugal fan catalogue · source previewTechnical resourcesEC backward-curved centrifugal fan catalogueUse the full EC fan designation to locate the curve, control wiring and installation drawing.EC centrifugal fan sheets: 225 and 250 mm · source previewEC centrifugal fan sheets: 225 and 250 mm · source previewTechnical resourcesEC centrifugal fan sheets: 225 and 250 mmCompare electrical load, noise and installation details across the 225 and 250 mm entries.B3P190-EC072-907 · manufacturer model sheet.B3P190-EC072-907 · manufacturer model sheet.Compare modelsCompare compact EC suffixes against their source sheetsCheck speed, electrical load and sound level for individual catalogue variants before opening the curve and mounting drawing.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.