AFL Motors

EC backward-curved centrifugal fan B3P355-EC137-900

B3P355-EC137-900 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P355-EC137-900 product photo · AFL catalogue, page 136.
B3P355-EC137-900 product photo · AFL catalogue, page 136.

Review the documented model data

Supply: 3x400 VAC. Frequency: 50/60 Hz. Power input: 1700 W. Speed: 2700 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 3x400 VAC, 50/60 Hz, 1700 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P355-EC137-900, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

All B3P355-EC137 variants

Specifications

Model
B3P355-EC137-900
Drive
EC
Supply
3x400 VAC
Frequency
50/60 Hz
Current draw
2.8 A
Power input
1700 W
Speed
2700 rpm
Control input
0-10 VDC / PWM
Sound pressure level
81 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
F
Impeller material
sheet aluminium

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 136
View original drawing or performance sheet · page 136B3P355-EC137-900 manufacturer sheet, page 136

Open original PDF at this page

AFL product catalogue · page 136
Catalogue fieldValue on this page
Supply3x400 VAC
Frequency50/60 Hz
Current draw2.8 A
Power input1700 W
Speed2700 rpm
Control input0-10 VDC / PWM
Sound pressure level81 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classF
Impeller materialsheet aluminium
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

B3P355-EC137-010 product photo · AFL catalogue, page 133.B3P355-EC137-010 product photo · AFL catalogue, page 133.B3P355-EC137-010B3P355-EC137-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P355-EC137-100 product photo · AFL catalogue, page 132.B3P355-EC137-100 product photo · AFL catalogue, page 132.B3P355-EC137-100B3P355-EC137-100: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P355-EC137-200 product photo · AFL catalogue, page 134.B3P355-EC137-200 product photo · AFL catalogue, page 134.B3P355-EC137-200B3P355-EC137-200: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.