AFL Motors

EC backward-curved centrifugal fan B3P355-EC188-017

B3P355-EC188-017 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P355-EC188-017 product photo · AFL catalogue, page 140.
B3P355-EC188-017 product photo · AFL catalogue, page 140.

Review the documented model data

Supply: 3x400 VAC. Frequency: 50/60 Hz. Power input: 3100 W. Speed: 3800 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 3x400 VAC, 50/60 Hz, 3100 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P355-EC188-017, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

All B3P355-EC188 variants

Specifications

Model
B3P355-EC188-017
Drive
EC
Supply
3x400 VAC
Frequency
50/60 Hz
Current draw
5.2 A
Power input
3100 W
Speed
3800 rpm
Control input
0-10 VDC / PWM
Sound pressure level
96 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
F
Impeller material
sheet aluminium

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 140
View original drawing or performance sheet · page 140B3P355-EC188-017 manufacturer sheet, page 140

Open original PDF at this page

AFL product catalogue · page 140
Catalogue fieldValue on this page
Supply3x400 VAC
Frequency50/60 Hz
Current draw5.2 A
Power input3100 W
Speed3800 rpm
Control input0-10 VDC / PWM
Sound pressure level96 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classF
Impeller materialsheet aluminium
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

B3P355-EC092-001 product photo · AFL catalogue, page 128.B3P355-EC092-001 product photo · AFL catalogue, page 128.B3P355-EC092-001B3P355-EC092-001: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P355-EC188-001 product photo · AFL catalogue, page 138.B3P355-EC188-001 product photo · AFL catalogue, page 138.B3P355-EC188-001B3P355-EC188-001: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P355-EC188-010 product photo · AFL catalogue, page 139.B3P355-EC188-010 product photo · AFL catalogue, page 139.B3P355-EC188-010B3P355-EC188-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.