AFL Motors

Double-inlet centrifugal blowerF3P250-EC137-100

F3P250-EC137-100 is an AFL double-inlet centrifugal blower in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

F3P250-EC137-100 product photo · AFL catalogue, page 229.
F3P250-EC137-100 product photo · AFL catalogue, page 229.

Review the documented model data

Supply: 3x400 VAC. Frequency: 50/60 Hz. Power input: 655 W. Speed: 920 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 3x400 VAC, 50/60 Hz, 655 W for this double-inlet centrifugal blower. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44.

Check the installation and operating point

Check clearance at both intake openings, the outlet orientation and the fixing positions against the model drawing. Include the cabinet, filter and duct losses in the required duty point.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include F3P250-EC137-100, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · Double-inlet blowers

All F3P250-EC137 variants

Specifications

Model
F3P250-EC137-100
Drive
EC
Supply
3x400 VAC
Frequency
50/60 Hz
Current draw
1.2 A
Power input
655 W
Speed
920 rpm
Control input
0-10 VDC / PWM
Sound pressure level
74 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
PA66

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 229
View original drawing or performance sheet · page 229F3P250-EC137-100 manufacturer sheet, page 229

Open original PDF at this page

AFL product catalogue · page 229
Catalogue fieldValue on this page
Supply3x400 VAC
Frequency50/60 Hz
Current draw1.2 A
Power input655 W
Speed920 rpm
Control input0-10 VDC / PWM
Sound pressure level74 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialPA66
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

Check both inlet clearances and the discharge orientation in the cabinet drawing. Provide the working point with the filter and duct losses included.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

F3P120-EC072-010 product photo · AFL catalogue, page 214.F3P120-EC072-010 product photo · AFL catalogue, page 214.F3P120-EC072-010F3P120-EC072-010: review double-inlet centrifugal blower specifications, mounting requirements and technical sources before selecting a fan for your equipment.F3P133-EC072-016 product photo · AFL catalogue, page 215.F3P133-EC072-016 product photo · AFL catalogue, page 215.F3P133-EC072-016F3P133-EC072-016: review double-inlet centrifugal blower specifications, mounting requirements and technical sources before selecting a fan for your equipment.F3P250-EC137-008 product photo · AFL catalogue, page 228.F3P250-EC137-008 product photo · AFL catalogue, page 228.F3P250-EC137-008F3P250-EC137-008: review double-inlet centrifugal blower specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.