Technical guides
Which duty point applies to a fan wall or an in-row cooler?
Compare paired pressure and flow values for the equipment arrangement you are buying.
Read guide Which duty point applies to a fan wall or an in-row cooler? →Explore fan technology, equipment applications and buying decisions. Follow each guide to relevant models, source documents and project requirements.
Technical guides
Compare paired pressure and flow values for the equipment arrangement you are buying.
Read guide Which duty point applies to a fan wall or an in-row cooler? →Technical guides
Build the list from the approved equipment variants and installed labels. Similar speed and power figures can correspond to more than one catalogue code.
Read guide Which fan codes belong in the service spare list? →Technical guides
Add the grille position, intended flow direction, available space and relevant operating points. The mounting dimensions alone do not describe coil resistance.
Read guide What should accompany an outdoor heat-pump coil drawing? →Technical guides
The compact leaflet uses A, B and C drawing labels. The numbers cannot be applied to the enclosure without the source diagram and its orientation.
Read guide Which dimensions should be checked before fitting a compact B3P? →Technical guides
The model table gives input power and speed. It does not establish the input power required by two fans at your installed airflow and pressure.
Read guide Does a lower catalogue wattage make a fan a better choice? →Technical guides
The catalogue lists 135 W and 2450 rpm at 50 Hz, then 190 W and 2600 rpm at 60 Hz. The entry identifies both rows under the same model.
Read guide What changes when a B2E250 fan moves from 50 to 60 Hz? →Technical guides
The leaflet shows the same A and C dimensions. The B dimension changes from 85 to 102 mm. This adds 17 mm along the B axis.
Read guide Will both B3P190 compact variants fit one enclosure? →