Operating point
State airflow and static pressure together, with units and the installed resistance from filters, coils or grilles. Compare the required point with the selected model curve.
Explore the product range, complete models and selection requirements.
State airflow and static pressure together, with units and the installed resistance from filters, coils or grilles. Compare the required point with the selected model curve.
Check supply, frequency, speed control and feedback against the complete designation. Keep 50 Hz and 60 Hz ratings separate when both are listed.
Compare housing, mounting positions, inlet clearance, outlet direction and service access against the current drawing.
The values below come from published model records. Open a model for its drawing, curve, available documents and specific conditions.
| Product | Electrical data | Listed performance and conditions | Technical source |
|---|---|---|---|
| B3P133-EC072-101 | Supply 230 VAC Frequency 50/60 Hz Current draw 0.4 A Control input 0-10 VDC / PWM | Drawing A 144 mm Drawing B 73 mm Drawing C 165 mm Power input 50 W | Model specifications Source documents |
| B3P190-EC072-103 | Review electrical requirements | Drawing A 201 mm Drawing B 85 mm Drawing C 225 mm | Model specifications Source documents |
| B3P190-EC072-907 | Supply 220 VAC Frequency 50/60 Hz Current draw 1.2 A Drive EC Control input 0–10 VDC / PWM | Drawing A 201 mm Drawing B 102 mm Drawing C 225 mm Listed speed 4200 rpm | Model specifications Source documents |
B3P190-EC072-907 product photo · AFL catalogue, page 82.Will both B3P190 compact variants fit one enclosure?The leaflet shows the same A and C dimensions. The B dimension changes from 85 to 102 mm. This adds 17 mm along the B axis.
B3P133-EC072-101 product photo · AFL catalogue, page 74.Which dimensions should be checked before fitting a compact B3P?The compact leaflet uses A, B and C drawing labels. The numbers cannot be applied to the enclosure without the source diagram and its orientation.