AFL Motors

EC backward-curved centrifugal fanB3P190-EC072-005

B3P190-EC072-005 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

B3P190-EC072-005 product photo · AFL catalogue, page 81.
B3P190-EC072-005 product photo · AFL catalogue, page 81.

Review the documented model data

Supply: 230 VAC. Frequency: 50/60 Hz. Power input: 95 W. Speed: 3570 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 230 VAC, 50/60 Hz, 95 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44. The earlier catalogue lists 220 VAC; confirm the supply on the offered revision. The stored records contain differing values: Supply 230 VAC versus Nominal supply 220 VAC. Power input 95 W versus Input power 100 W. Confirm which document revision and operating conditions apply to the offered model before specification.

Check the installation and operating point

Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include B3P190-EC072-005, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · EC backward-curved fans

All B3P190-EC072 variants

Specifications

Model
B3P190-EC072-005
Nominal supply
220 VAC
Frequency
50/60 Hz
Listed speed
3570 rpm
Input power
100 W
Supply
230 VAC
Current draw
0.73 A
Power input
95 W
Speed
3570 rpm
Control input
0-10 VDC / PWM
Sound pressure level
78 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
PA66

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 81
View original drawing or performance sheet · page 81B3P190-EC072-005 manufacturer sheet, page 81

Open original PDF at this page

Before specifying this model

Confirm the complete suffix, current revision, duty-point curve, applicable certification and availability with AFL. This record describes the model in the cited manufacturer catalogue.

AFL product catalogue · page 81
Catalogue fieldValue on this page
Supply230 VAC
Frequency50/60 Hz
Current draw0.73 A
Power input95 W
Speed3570 rpm
Control input0-10 VDC / PWM
Sound pressure level78 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialPA66

Sources

Files and media

Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

B3P190-EC072-002 product photo · AFL catalogue, page 80.B3P190-EC072-002 product photo · AFL catalogue, page 80.B3P190-EC072-002B3P190-EC072-002: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P190-EC072-039 · manufacturer model sheet.B3P190-EC072-039 · manufacturer model sheet.B3P190-EC072-039B3P190-EC072-039: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.B3P190-EC072-046 · manufacturer model sheet.B3P190-EC072-046 · manufacturer model sheet.B3P190-EC072-046B3P190-EC072-046: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Related resources and guides

B3P220-EC072-100 product photo · AFL catalogue, page 87.B3P220-EC072-100 product photo · AFL catalogue, page 87.Compare modelsCompare EC centrifugal fan catalogue entriesUse these catalogue rows to shortlist by exact code, then compare pressure and airflow at the same duty point.B3P190-EC072-005 product photo · AFL catalogue, page 81.B3P190-EC072-005 product photo · AFL catalogue, page 81.Technical resourcesVariant identification recordIdentify the full suffix before requesting replacement data.AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.Selection guideWhat should the sample label match on receipt?Two full codes can share headline electrical ratings. A matching wattage does not identify the unit received.B3P190-EC072-005 product photo · AFL catalogue, page 81.B3P190-EC072-005 product photo · AFL catalogue, page 81.Selection guideWhich fan codes belong in the service spare list?Build the list from the approved equipment variants and installed labels. Similar speed and power figures can correspond to more than one catalogue code.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.