EC backward-curved centrifugal fanB3P190-EC072-101
B3P190-EC072-101 is an AFL ec backward-curved centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Review the documented model data
Supply: 220 VAC. Frequency: 50/60 Hz. Power input: 70 W. Speed: 3200 rpm. Control input: 0-10 VDC / PWM. Published diameter: 190 mm. The AFL catalogue lists 230 VAC, 50/60 Hz, 70 W for this ec backward-curved centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP54. The stored records contain differing values: Supply 220 VAC in the stored specification versus 230 VAC in the source table. Confirm which document revision and operating conditions apply to the offered model before specification.
Check the installation and operating point
Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.
Match the electrical interface
Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.
Use the technical documents
Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.
Discuss this model
Include B3P190-EC072-101, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.
EC fans and blowers · EC backward-curved fans
Specifications
- Model
- B3P190-EC072-101
- Supply
- 220 VAC
- Frequency
- 50/60 Hz
- Listed speed
- 3200 rpm
- Input power
- 70 W
- Current draw
- 0.53 A
- Listed sound pressure level
- 70 dB
- Drive
- EC
- Published diameter
- 190 mm
- Ambient temperature
- −25 to +60 °C
- Power input
- 70 W
- Speed
- 3200 rpm
- Control input
- 0-10 VDC / PWM
- Sound pressure level
- 70 dB
- Degree of protection
- IP54
- Working temperature
- -25 ~ +60 °C
- Insulation class
- B
- Impeller material
- PA66
Manufacturer catalogue pages
Check the drawing and rated conditions for the complete model.
Catalogue page 79Selection from the source sheet
190 mm EC backward-curved centrifugal fan. The sheet lists 3200 rpm and 70 W. Check the control curve at the required airflow and pressure, the installation drawing and the full suffix.
| Catalogue field | Value on this page |
|---|---|
| Supply | 230 VAC |
| Frequency | 50/60 Hz |
| Current draw | 0.53 A |
| Power input | 70 W |
| Speed | 3200 rpm |
| Control input | 0-10 VDC / PWM |
| Sound pressure level | 70 dB |
| Degree of protection | IP54 |
| Working temperature | -25 ~ +60 °C |
| Insulation class | B |
| Impeller material | PA66 |
Related documents and engineering decisions
Compact EC centrifugal fan sheets: 175 and 190 mm · p. 2 EC backward-curved centrifugal fan catalogue · p. 11Equipment fit and selection
For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.
Equipment selection guide What to check before ordering Factory and qualification documentsRelated models to review
Compare the complete suffix, mounting and operating conditions before specifying a replacement.
B3P190-EC072-002 product photo · AFL catalogue, page 80.B3P190-EC072-002B3P190-EC072-002: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
B3P190-EC072-005 product photo · AFL catalogue, page 81.B3P190-EC072-005B3P190-EC072-005: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
B3P190-EC072-039 · manufacturer model sheet.B3P190-EC072-039B3P190-EC072-039: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.Related resources and guides
EC backward-curved centrifugal fan catalogue · source previewTechnical resourcesEC backward-curved centrifugal fan catalogueUse the full EC fan designation to locate the curve, control wiring and installation drawing.
Compact EC centrifugal fan sheets: 175 and 190 mm · source previewTechnical resourcesCompact EC centrifugal fan sheets: 175 and 190 mmCompare the listed compact impellers, frames, wiring and control curves by complete suffix.
B3P190-EC072-907 · manufacturer model sheet.Compare modelsCompare compact EC suffixes against their source sheetsCheck speed, electrical load and sound level for individual catalogue variants before opening the curve and mounting drawing.