Compact EC centrifugal fan B3P190-EC072-907
B3P190-EC072-907 is an AFL compact ec centrifugal fan in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

Review the documented model data
Supply: 220 VAC. Frequency: 50/60 Hz. Power input: 170 W. Speed: 4200 rpm. Control input: 0–10 VDC / PWM. Published diameter: 190 mm. Drawing B: 102 mm. The AFL catalogue lists 230 VAC, 50/60 Hz, 170 W for this compact ec centrifugal fan. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP54. The stored records contain differing values: Degree of protection IP54 versus Protection IP44. Supply 220 VAC in the stored specification versus 230 VAC in the source table. Confirm which document revision and operating conditions apply to the offered model before specification.
Check the installation and operating point
Compare impeller and mounting clearances, inlet arrangement and available installation space. Check the required airflow and static pressure together on the model curve.
Match the electrical interface
Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.
Use the technical documents
Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.
Discuss this model
Include B3P190-EC072-907, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.
EC fans and blowers · Compact EC fans
Specifications
- Model
- B3P190-EC072-907
- Drawing A
- 201 mm
- Drawing B
- 102 mm
- Drawing C
- 225 mm
- Supply
- 220 VAC
- Frequency
- 50/60 Hz
- Listed speed
- 4200 rpm
- Input power
- 170 W
- Current draw
- 1.2 A
- Listed sound pressure level
- 74 dB
- Drive
- EC
- Published diameter
- 190 mm
- Ambient temperature
- −25 to +60 °C
- Material
- PA66
- Protection
- IP44
- Insulation class
- B
- Control input
- 0–10 VDC / PWM
- Feedback
- 1 pulse per revolution
- Power input
- 170 W
- Speed
- 4200 rpm
- Sound pressure level
- 74 dB
- Degree of protection
- IP54
- Working temperature
- -25 ~ +60 °C
- Impeller material
- PA66
Manufacturer catalogue pages
Check the drawing and rated conditions for the complete model.
Catalogue page 82Before specifying this model
Confirm the complete suffix, current revision, duty-point curve, applicable certification and availability with AFL. This record describes the model in the cited manufacturer catalogue.
Selection from the source sheet
190 mm EC backward-curved centrifugal fan. The sheet lists 4200 rpm and 170 W. Check the control curve at the required airflow and pressure, the installation drawing and the full suffix.
Model documentation
The sheet lists CCC and CE. Request the applicable documentation for this suffix and destination market. The sound figure needs the measurement conditions for comparison.
| Catalogue field | Value on this page |
|---|---|
| Supply | 230 VAC |
| Frequency | 50/60 Hz |
| Current draw | 1.2 A |
| Power input | 170 W |
| Speed | 4200 rpm |
| Control input | 0-10 VDC / PWM |
| Sound pressure level | 74 dB |
| Degree of protection | IP54 |
| Working temperature | -25 ~ +60 °C |
| Insulation class | B |
| Impeller material | PA66 |
Sources
Related documents and engineering decisions
Compact EC centrifugal fan sheets: 175 and 190 mm · p. 3Files and media
Equipment fit and selection
Compare the mounting axes and clearance before checking the curve at the enclosure duty point. Similar nominal diameters can use different mounting depths.
Equipment selection guide What to check before ordering Factory and qualification documentsRelated models to review
Compare the complete suffix, mounting and operating conditions before specifying a replacement.
B3P133-EC072-101 product photo · AFL catalogue, page 74.B3P133-EC072-101B3P133-EC072-101: review compact ec centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
B3P compact series · manufacturer leaflet cover. See the dimension table for the 103 suffix.B3P190-EC072-103B3P190-EC072-103: review compact ec centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.
B3P133-EC072-010 product photo · AFL catalogue, page 76.B3P133-EC072-010B3P133-EC072-010: review ec backward-curved centrifugal fan specifications, mounting requirements and technical sources before selecting a fan for your equipment.Related resources and guides
B3P190-EC072-907 product photo · AFL catalogue, page 82.Compare modelsCan the two B3P190 variants share one enclosure?Both entries show A = 201 mm and C = 225 mm. Their B dimensions differ by 17 mm.
B3P133-EC072-101 product photo · AFL catalogue, page 74.Technical resourcesManufacturer catalogue referencesFind the manufacturer documents cited by catalogue model and confirm the current revision for your project.
AFL product family illustration · centrifugal fan. Individual mounting and accessories vary by suffix.Technical resourcesCompact enclosure clearance recordUse drawing dimensions to initiate a mechanical review.
Compact EC centrifugal fan sheets: 175 and 190 mm · source previewTechnical resourcesCompact EC centrifugal fan sheets: 175 and 190 mmCompare the listed compact impellers, frames, wiring and control curves by complete suffix.
B3P190-EC072-907 · manufacturer model sheet.Compare modelsCompare compact EC suffixes against their source sheetsCheck speed, electrical load and sound level for individual catalogue variants before opening the curve and mounting drawing.
B3P190-EC072-907 product photo · AFL catalogue, page 82.Selection guideWill both B3P190 compact variants fit one enclosure?The leaflet shows the same A and C dimensions. The B dimension changes from 85 to 102 mm. This adds 17 mm along the B axis.