AFL Motors

Single-inlet centrifugal blower F3P280-EC137-001

F3P280-EC137-001 is an AFL single-inlet centrifugal blower in the published model records. Review its documented specifications, installation requirements and source information against your equipment duty.

F3P280-EC137-001 product photo · AFL catalogue, page 212.
F3P280-EC137-001 product photo · AFL catalogue, page 212.

Review the documented model data

Supply: 3-phase 380 VAC. Frequency: 50/60 Hz. Power input: 950 W. Speed: 1150 rpm. Control input: 0-10 VDC / PWM. The AFL catalogue lists 3x400 VAC, 50/60 Hz, 950 W for this single-inlet centrifugal blower. Check the 0-10 VDC / PWM control interface against your controller. The catalogue enclosure rating is IP44. The stored records contain differing values: Supply 3-phase 380 VAC in the stored specification versus 3x400 VAC in the source table. Confirm which document revision and operating conditions apply to the offered model before specification.

Check the installation and operating point

Check the available inlet clearance, scroll outlet orientation and mounting positions. Compare the installed air path and available cabinet space with the model drawing.

Match the electrical interface

Confirm the supply and the exact speed-control and feedback interface required by the equipment controller. An EC designation alone does not establish the supported control signal.

Use the technical documents

Check the attached model documents and their page references before sample evaluation. Confirm the complete suffix and document revision. Performance at your required duty point must be checked on the corresponding curve.

Discuss this model

Include F3P280-EC137-001, required airflow and static pressure, power supply and available installation space in your inquiry. Attach the equipment layout and identify any required control or feedback signals.

EC fans and blowers · Single-inlet blowers

All F3P280-EC137 variants

Specifications

Model
F3P280-EC137-001
Drive
EC
Supply
3-phase 380 VAC
Frequency
50/60 Hz
Listed speed
1150 rpm
Input power
950 W
Current draw
1.6 A
Listed sound pressure level
79 dB
Power input
950 W
Speed
1150 rpm
Control input
0-10 VDC / PWM
Sound pressure level
79 dB
Degree of protection
IP44
Working temperature
-25 ~ +60 °C
Insulation class
B
Impeller material
galvanised sheet steel

Manufacturer catalogue pages

Check the drawing and rated conditions for the complete model.

Catalogue page 212
View original drawing or performance sheet · page 212F3P280-EC137-001 manufacturer sheet, page 212

Open original PDF at this page

Selection from the source sheet

The manufacturer lists 1150 rpm and 950 W for this suffix. Compare the matching numbered curve, wiring and dimensions on the source page.

AFL product catalogue · page 212
Catalogue fieldValue on this page
Supply3x400 VAC
Frequency50/60 Hz
Current draw1.6 A
Power input950 W
Speed1150 rpm
Control input0-10 VDC / PWM
Sound pressure level79 dB
Degree of protectionIP44
Working temperature-25 ~ +60 °C
Insulation classB
Impeller materialgalvanised sheet steel

Related documents and engineering decisions

EC centrifugal inlet configurations and wiring · p. 1 EC forward-curved blower catalogue · p. 14
Compare this modelCheck evidenceAsk engineering about this model

Equipment fit and selection

For air-handling equipment, specify airflow together with static pressure, mounting space and speed control. Confirm the selected suffix against the equipment drawing.

Equipment selection guide What to check before ordering Factory and qualification documents

Related models to review

Compare the complete suffix, mounting and operating conditions before specifying a replacement.

F3P120-EC072-001 product photo · AFL catalogue, page 188.F3P120-EC072-001 product photo · AFL catalogue, page 188.F3P120-EC072-001F3P120-EC072-001: review single-inlet centrifugal blower specifications, mounting requirements and technical sources before selecting a fan for your equipment.F3P120-EC072-005 product photo · AFL catalogue, page 185.F3P120-EC072-005 product photo · AFL catalogue, page 185.F3P120-EC072-005F3P120-EC072-005: review single-inlet centrifugal blower specifications, mounting requirements and technical sources before selecting a fan for your equipment.Fan illustrated on the corresponding source sheet · PDF page 5.Fan illustrated on the corresponding source sheet · PDF page 5.F3P120-EC072-048F3P120-EC072-048: review single-inlet centrifugal blower specifications, mounting requirements and technical sources before selecting a fan for your equipment.

Related resources and guides

EC centrifugal inlet configurations and wiring · source previewEC centrifugal inlet configurations and wiring · source previewTechnical resourcesEC centrifugal inlet configurations and wiringEngineering sheets supplied in the EC Double Inlet Centrifugal file, including individual single-inlet entries.EC forward-curved blower catalogue · source previewEC forward-curved blower catalogue · source previewTechnical resourcesEC forward-curved blower catalogueCompare EC blower variants, control curves, inlet configuration and outlet dimensions.

Request specifications

Your inquiry will be saved for the AFL team. For direct contact, use the sales details on the Contact page.